世旼电子工业 >> 产品介绍 >> PE PIPE 自动对接焊机
Selding-225A
Selding-315A
Selding-400A
Selding-500A
Selding-630A
根据测定的外部温度,自动控制加热温度及冷却时间.
通过内装的打印机可及时确认熔接情况.
打印机输出内容包括日期、外部温度、加热温度、现场编号、拉伸压力、 熔接压力、管材规格、熔接结果、冷却时间、压着时间等便于确认熔接 内容的参数
本产品曾取得韩国燃气安全公司熔接机性能确认认证.
Selding-21 控 制 器
Input power cable shall be 5.5mm2 or more,and be as short as possible from input side(power generator).
Use the grounded power.
Combine heater connector before turning on power.
When a message "combine coupling" appears about 5 seconds after turning on controller switch, remove foreign materials attached to coupling at this time and then combine coupling.
Oil sensor is installed inside oil tank, and alarm message is displayed if oil is deficient, so at this time, fill oil(alarm message disappears).
For oil, use #32 hydraulic oil during winter and #46 hydraulic oil during summer .
-
Selding-225A/315A
Selding-400A
Selding-500A/630A
输入电压
AC170~250V
保管温度
-10~70℃
运转温度
0~60℃
最大工作压力
0~150Kgf/cm2
大 小
480(W)X325(D)X437(H)
480(W)X345(D)X592(H)
控制器重量
32Kg
49Kg
消耗功率 ( 加热器,修剪器 包含 )
5Kw
7Kw
10Kw
存储容量
200 回
熔接设定范围
ISO 40 - 315 JIS 30 - 300 ASTM 1-1/4 - 12IPS
ISO 180 - 400 JIS 200 - 400 ASTM 8 - 16IPS
ISO 225 - 630 JIS 200 - 600 ASTM 8 - 24IPS
This is used in doing fusion work. This is used in selecting work. This is used in checking fusion result. This is used in close the body. This is used in printing fusion result. This is used in open the body. This is spare button. This is used in setting data.
牢固和轻便的结构,便于作业者操作.
紧凑的机体外形便于管道工程.
以铰接方式设计的夹具, 便于管材的安装.
315型机体上装配的加热器分离用滑板有利于管材与加热器的分离.
通过一体型内衬方式修整表面后用肉眼确认时管材整列状态良好.
-
Selding-225A
Selding-315A
Selding-400A
Selding-500A
Selding-630A
保管温度
-10~70℃
运转温度
-5~60℃
最大工作压力
0~150Kgf/cm2
本体大小
594(W) 335(D) 364(H)
627(W) 482(D) 455(H)
752(W) 596(D) 601(H)
958(W) 744(D) 756(H)
1,050(W) 890(D) 960(H)
本体重量
32Kg
53Kg
60Kg
146Kg
200Kg
加热器重量
7Kg
11Kg
17Kg
26Kg
32Kg
修剪器重量
13Kg
21Kg
35Kg
65Kg
78Kg
加热器消耗功率
AC220V 2Kw
AC220V 3Kw
AC220V 4Kw
AC220V 4.4Kw
AC220V 5Kw
修剪器消耗功率
AC220V 0.7Kw
AC220V 1.5Kw
AC220V 2.5Kw
熔接范围 ISO 本体
SDR13.6 40-225
SDR13.6 50-315
SDR9 180-400
SDR17 225-500
SDR17 315-630
熔接范围 JIS 本体
SDR9 30-200
SDR15.5 40-300
SDR9 200-400
SDR9 250-500
SDR13.6 300-600
熔接范围 IPS 本体
SDR9 1,1/4-8
SDR17 1,1/2-12
SDR9 8-16
SDR21 8-20
SDR13.6 12-24
实用新案登记 第0170659号 合成树脂管自动热熔接机的夹具可拆卸装置
实用新案登记 第0170660号 合成树脂管自动热熔接机的内衬构造
实用新案登记 第0170680号 PE管熔接机的管材夹紧装置
实用新案登记 第0277677号 PE管熔接机的管材夹紧装置
实用新案登记 第0283836号 具有加热器分离功能的管材夹紧装置
实用新案登记 第0283846号 PE管熔接机的管材夹紧装置
实用新案登记 第0317722号 管材夹具
专 利 第0456613号 PE管熔接机的管材夹紧装置
专 利 第0456614号 PE管熔接机的管材夹紧装置
专 利 第0456615号 具有加热器分离功能的管材夹紧装置