世旼电子工业 >> 产品介绍 >> 电子接头自动熔接机

 

 


承插焊时加工管材尺寸越大,对输出功率的要求越严格 3600W超强输出功率 连续熔接 大口径管(200mm以上)时 本产品通过其具有的充足的功率和稳定的输出电压保证牢固地 熔接

  • 与输入电压的变化无关,输出电压总保持在8-50V±0.2V, 保证了稳定的熔接
  • 通过内装的打印机可以及时确认熔接情况
  • 熔接作业时时刻检查输出电压及输出电流, 以便发生异常时及时停止熔接.
  • 电阻插入式和条形码、手动方式中可任意选择某一方式进行熔接作业的通用熔接机. (条形码类型属于选项)
  • 本机器具有检查外部温度后自动控制熔接时间(订购事项)的功能
  • 具有充分的输出功率, 熔接范围可达到外形400mm
  • 本产品曾取得韩国燃气安全公司熔接机性能确认认证.
  • 根据顾客需要可制作额定电源为110V的熔接机. .

控 制 器 (OLD MODEL) 控 制 器 (NEW MODEL)
  • Make sure to use the grounded power source for input.
  • Input cable must be more than 3.5sq, and use as short generator or input consent as possible.
  • Avoid passing of other objects over various cables.
  • Don't connect foreign devices to output cable and socket; keep them clean at all times.
  • Avoid direct sunlight exposure.
  • Avoid strong shocks.
  • Avoid water ingress; do not keep the device at humidified places for long time.

输入电压 AC85 - 250V
输出电压 AC8-50V ±0.2V
保管温度 -10℃~70℃
运转温度 0℃~50℃
大小 350(W)X260(D)X230(H)
控制器重量 21Kg
消耗功率 0.1Kw-3.6Kw
输出电流 2A-80A
存储容量 200
熔接时间 10 - 5999

操作板

Clean up
memory
You can move cursor
to 4 each direction
and set the date and time.
Print
fusion result
Check
fusion result
Cancel the selection.
Stop the current job
Start fusion Select current selection.
Start the job.

表 示 说 明

请更换电池
The device is equipped with high-capacity charging capacitor and backup battery with data keeping power.
本机械为220V 专用
请确认输入电压
当前输入电压 160V
Inlet power for this equipment rages from 85V to 150V(from 170V to 250V). If it goes out of this range, this message is displayed.
请正确连接电熔套筒 Check if EF socket is connected properly at fusion start. Connect the socket as required and then re-start fusion.
电熔套筒热线断路
请重新作业
This message is shown when the socket goes out or the coil is disconnected during fusion. Re-do fusion.
电熔套筒热失短路
请重新作业
This message is shown when coil in socket during fusion has effect on current. Re-do fusion.
超出记忆容量
打印后请删除
Yon can store up to 200 fusion results on the memory chip. If there are more than 200 fusion results, print out the chart and clean up the memory.
请与购买处联系 This message is shown when the output voltage is exceeded that means you have to contact seller.

 

 

 

 

 

 
NOTICE HOME HOME HOME HOME HOME Korean Page English Page Chinese Page